contact us

Service Hotline


Hynix Hardware & Electrical (Kunshan) Co., Ltd.

Contact: Manager Liu

Mobile: 182-6160-4979

Landline: 86-512-86162069

Address: 1937 Hanpu Road, Yushan Town, Kunshan City, Jiangsu Province

current position: Home >> News >> Industry news

What maintenance is required for non-standard automation equipment?


What maintenance is required for non-standard automation equipment? The following industrial robot system integration manufacturers Xiaobian for everyone to introduce:

The definition of non-standard automation equipment is a user-customized, user-only, non-market-distributed automation system integration equipment. It is assembled by unit equipment manufactured according to the unified industry standards and specifications promulgated by the state. It is based on the needs of customers. Development and design of equipment, different types of customers have different process requirements.

First, when installing, disassembling and adjusting the slewing mechanism, the machine should pay attention to ensure that the non-standard automation equipment is parallel to the centerline and the gear center line for the first time. It is necessary to properly fit the angle and effectively ensure that the machine is in operation.

Second, our equipment should always check the maintenance and connection of each part. If it is loose, it should be tightened. The connecting bolt of the body should check the tightness when the body is under pressure. All the connecting shafts must have a split pin and need to be opened. Fully, the main components are slowly and smoothly.

Third, often replace the parts that are easy to wear. If there is a fault, we need to eliminate the fault and then continue to operate. The motor bearing lubrication should be good. Always check all wires and cables for damage. It is necessary to timely dress and replace the damaged parts to effectively extend the maintenance of the machine.

Recently Viewed: